15 Gifts For The Repairs To Upvc Windows Lover In Your Life
Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they are not susceptible to rust or rot.
Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs and increase energy efficiency.
1. Broken Glass
If the glass in your window is broken it can cause a great deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good condition.
Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.
If you plan to attempt to remove the window panes yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled under.
It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from getting into your property until a professional arrives to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you may want to consider using a security door that has an integrated window as this will offer the best of both worlds.
2. Sagging
uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, over time they can suffer from a variety of issues like sliding. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.
To repair a window that is sagging, you can try repositioning the hinges. To do this, you'll need open the window so that you can get to the frame. With a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close the window and test it for an appropriate fit. If you're happy with the fit, tighten the screws until they remain in position.
If you are unable to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.
uPVC handles can also loosen up. This is typically caused by screws that have been removed over time, but it could also be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to shut the window and perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.
3. Water Leaks
If you wake up to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also undermine your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or missing.
It is a fairly easy fix that can be completed by any skilled DIYer. Depending on how severe the problem is, the old caulking might need to be removed. When it is time to uPVC repair, it is important to be careful not to over-caulk. This will only make your window more difficult to clean and decrease its energy efficiency.
It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.
Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.
It is also important to note that if the leak originates from the glass of your double-glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or are loose and blow open with ease, it may be hinges that are at the fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.
Like any mechanical component hinges will be damaged over time. Changing a window hinge is essentially a very simple procedure, but it is simpler with someone else to help you hold the frame in place.
It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.
The problem with the hinges on windows can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. This issue can be fixed by sending us a photograph through our website and we will be happy to give you advice.
Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a variety of various factors. The hinges may also become misaligned due to wear, which can cause a gap where the sash and frame meet. These can be easily repaired by giving them good clean, but when they're beyond repair, it could be necessary to get them realigned or replaced. The interlock, which is located on the hinge side of the window, can be misaligned. Again, it may be feasible to give them a clean but in certain cases, it may be necessary to have these replaced.
The next most common reason for draughts are the window seals. These can become worn down or damaged over time and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the risk of draughts.
One of the most effective ways to reduce drafts is to use a draught excluder. These are usually fabric tubes filled with some type of filler. They can be positioned on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!
With window repairs and repairs windows made of upvc will continue to provide a great level of insulation and security for your home. It is important to remember that all windows eventually wear out and it may be cheaper to replace them than to repair them. If you are experiencing issues with your upvc window you should consult an expert as soon as possible.